1) The measurement of blocks both horizontally and vertically do not seem to add up correctly (e.g. I have a block defined as 19cm wide, but it prints as being about 17.8 cms; and a block 17cms in height only printed as around 16 cms). Somebody else did a similar test (after raising the issue in fop-dev) and they found that a 6inch column results in 5.625inches. 2) in a table definition (again using -pdf renderer) the contents of one column are "creeping" to the left even though the "end" position is defined. It seems to occur when the contents of a previous column has little or no text. (In my test I had one column with lots of W's starting with 10-W's on row-1, reducing to 1W on row-10; at row-8 with only 3-W's - the contents of the second column start to get dragged over to the left.)
Sorry, part 1) of this bug had nothing to do with with FOP - it boiled down to print-setting in Adobe ! ... my mistake. But - part 2) still seems to be a problem at the moment
I can't reproduce the problem with 0.20.3. Unfortunately, the description is a little too vague, a testcase would have helped.
batch transition to closed remaining pre-FOP1.0 resolved bugs